1) I would say B is the best answer. A could be true if you were using the
European model which expects the NT1 to be provided by the telco (so the BRI
is going to have 4-wire coming to it). A North American BRI would have the
NT1 integrated, so in that case the answer would be false.
2) I suck at OSPF, plus someone else answered already
3) Too late for me to think this one through, sorry.
4) d. Standard ACL can specify source/dest. ip. Extended adds source/dest.
ports.
5) a, you're right (the dialer-group's interesting traffic is defined by the
matching dialer-list ACL)
6) Dialer pools map dialer profiles to interfaces, or say what interfaces
are available for dialers (well, another way is to say interfaces specify
which pools they belong to). Interfaces (ie interface bri2/0) have a
setting called 'dialer priority.' Looks like they're right on that one.
--
Jason Roysdon, CCNA, MCSE, CNA, Network+, A+
List email: [EMAIL PROTECTED]
Homepage: http://jason.artoo.net/
Cisco resources: http://r2cisco.artoo.net/
"John lay" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi Guys,
>
>
> While I am studying for the BCRAN, I found the following question
> with their answeres, I think that the answere of this questions are
> wrong. So I'd like to share this with you
>
>
> 1) choose all of the following that are correct
> a-A BRI connects to NT1 for 4-wire connection
> b-A BRI allways connects to TE1
>
> The answere b is correct and a is not. I think a should be correct
> as well.
>
> 2)Which two configuartions must be the same for OSPF routers
> to establish adjacency.
> a-Routing process ID
> b-Router ID
> c-Area ID
> d-Packet TTL
> e-Hello interval
>
> The answere a and c are correct. I think c and e should be correct
>
> 3) What is an asynchronous dialup?
> a-Dial on demand routing
> b-Dialup server
> c-PPP conncetion from end user
>
> The answere is b. I think it should be c
>
> 4)what is an extended access control list but not in a standard
> access list?
> a-Source hostname IP address and subnetmask
> b-Source network IP address and subnetmask
> c-Session layer information
> d-Destination port information
>
> the answere is b.
>
> 5)When configuring dialer information. Which statement is correct?
> a-Values of dialer-group and dialer-list must match.
> b-Values of dialer-group and dialer-list must be different.
> c-If you set a value for dialer-group you must not set a value
> for dialer-list
>
> The answere is C !!!!. I think it should be a.
>
> 6)Which of the following would you use to prioritize dial interfaces?
> a-Dialer access list
> b-Dialer pool
> c-Dialer interface
> d-Dialer profile
>
> The answere is d. I think it should be b.
>
> Waiting for your comments.
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
