> > Anyone know what might be going on? Suggestions for a known-working 1750
> > image that actually supports the VICs?
>
> 12.1.3T IP/Voice+ works for sure.
> (c1700-sv3y-mz.121-3.T)
>
> Do you have PVDM dsp module installed?
No PVDM installed. I wasn't aware that that was necessary for voice, if,
in fact, it is necessary. Is it? The VoIP quick start guide for the 1750
makes no mention of a PVDM being necessary.
Hm. The VIC shows up in a sho diag:
WIC Slot 2:
Dual FXS Voice Interface Card WAN daughter card
Hardware revision 1.1 Board revision B0
Serial number 0021928903 Part number 800-02493-02
Test history 0x00 RMA number 00-00-00
Connector type WAN Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0E 01 01 01 4E 9B C7 50 09 BD 02 00 00 00 00
0x30: 58 00 00 00 00 10 10 01 FF FF FF FF FF FF FF FF
Ben
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
