It sounds like your crossing over twice (which makes it a straight-thru).
Put a straight thru from your patch panel to the console server.
"Tai Ngo" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi All,
>
> I have setup console access to my routers via the Cisco RJ-2511 router.
> Everything works fine if all my routers are in the same room as my console
> server. However, I am having problems getting it to work across patch
> panels. I connect the roll cable from my router console port to the patch
> panel which connects to a patch panel in my server room. I then connect
> another roll cable from the server room's patch panel to the console
server.
> When I try to telnet into the port, it just sits there. I have tested all
> the roll cables and the patch panel ports to make sure they work. Have I
> left something out?
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
