Curtis,
As long as Quest is using Cisco's NI-2 DSLAMS it will work. You will
need to call them and see if the Central office that your work out of has
NI-2 DSLAMS. The older version of the 6100 does not support the 827.
Wojtek
----- Original Message -----
From: "Curtis Call" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, November 21, 2000 7:03 PM
Subject: Cisco 827 and Cisco DSL switch compatibility
> I am trying to figure out if Qwest supports Cisco's new 827 ADSL router
(it
> uses IOS as opposed to CBOS so of course I want to use it). I know that
> Qwest is using some sort of Cisco DSL switch in the central office but I
am
> not sure which model (6100?) and getting the info from their technical
> support seems to be impossible. I assume that the 827 would work with any
> Cisco DSL switch, but I wanted to verify this before I bought it.
> Any ideas would be appreciated.
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
