Show ip route [name of protocol]
e.g to show all the RIP routes: show ip route rip
HTH
Chuck
133 days or so. Clock's ticking!
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
[EMAIL PROTECTED]
Sent: Sunday, November 26, 2000 4:07 PM
To: [EMAIL PROTECTED]
Subject: IP routing tables
Hi all,
Does anyone know if there is an IOS command that will show the routing
table for (or contributed by) a particular routing protocol, when there are
multiple routing protocols running?
In other words, a command to show what the IP routing table would look like
if there was only a single routing protocol.
I am aware of 'show ip route [protocol]', but that appears to give a subset
of the actual routing table. For example, 'show ip route ospf' simply
chops all the non-ospf routes out of the output of 'show ip route'. I'd
like a command that shows what ospf (or eigrp or whatever) routes exist,
even the ones that are not actually used because they are, for example,
over-ridden by a static route for the same destination.
If anyone can work out what I'm trying to ask, congratulations, because I
don't think I've expressed it very well. If anyone knows an answer, even
better :-)
JMcL
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
