The solution of configurinh a specific dialer interface will waste an IP address and a telephone number from my pool as it will be dedicated only for that remote user. I think there is another solution if I can deal with the remote user through its username or profile configured on the AS5300 Access Server. Any one have any idea if I can do that and how ? Thorsten Toenges <[EMAIL PROTECTED]> wrote: you can create a specific dialer interface for him with a dedicated number. There you can assign a local ip pool for these dialers and set an access-list-. i think there are other solutions also, but what do you think about that ? Thorsten Toenges Network Engineer Exodus Communications� E-Mail : [EMAIL PROTECTED] Web : http://www.exodus.net Europe-ASN-8709 US-ASN-3967 Asia-ASN-4197 -----Original Message----- From: Ahmed El-Ghobary [mailto:[EMAIL PROTECTED]] Sent: Monday, November 27, 2000 1:05 PM To: [EMAIL PROTECTED] Subject: Remote user profile Hello all, I need to set a profile for a specific remote user dialing on AS5300 access server to let him access only specific server and can not telnet or ping on other servers but I don't know how!! If I can use access list for that it will be great but the problem is that this user obtains dynamic IP from a pool so I need to specify in the access list the source username not the source IP. Any help? ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 _________________________________ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
