I have seen this before with inbound access lists......dont know why it is
port 0, i beleive outbound access lists give the port numbers....
Brian
-----Original Message-----
From: Robert O'Brien [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 30, 2000 12:12 PM
To: [EMAIL PROTECTED]
Subject: Strange occurances in syslog
Well I am stumped.
The lines in the syslog from an "access-list 150 permit ip any any log"
are not returning the port numbers, just a zero. This makes it very
difficult to diagnose a traffic flow. This is being run on a 2500 series
router with I think it was 12.07(T) IOS.
Any suggestions or has any one seen this before??
Our other routers (all types of chassis including 2500's) seem to be
okay normally, but this is not definate.
Rob O'Brien
CCNA
Canberra Australia
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
