RE: Unbreakable Auth on Router?

[Montgomery, Robert WARCOM Contractor]

Thanks Russ (and to those of you who have also replied).

I guess what I should have said was, "I think my break sequences aren't
working - the ones I got from CCO."  I say this because when I power off/on
the router, regardless of the keys I use, the process is NOT stopping.  So
this led me to ask myself (because when my router won't answer back) two
questions (I'm using Hyperterm through Win2K Prof):

1) Are the break sequences I am using valid? (I got them from CCO.)
2) Can AAA be thwarted like the EN password can?

If 1) is yes but 2) is no...uh oh!
If 1) is no  and 2) is yes...then I just have to figure out what works in
Win2K.

But I can't get past "Press RETURN to Start!"

Rob

-----Original Message-----
From: Russell Lusignan [mailto:[EMAIL PROTECTED]]
Sent: Thursday, November 30, 2000 12:34 PM
To: [EMAIL PROTECTED]
Subject: Re: Unbreakable Auth on Router?


Yes.. but when you do the password recovery (before you reboot the router
with the new enable password) check to see if AAA authentication is enabled
on the router.. if it is go into config mode and enter "no aaa new-model"
that will remove it..  save the config to startup-config and reboot..

Hope that helps
Russ..

""Montgomery, Robert WARCOM Contractor"" <[EMAIL PROTECTED]> wrote
in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Happy holidays all -
>
> I have a router that I can not get into.  It apparently has authorization
> enabled because it says "Authorization Failed."  Will the password
recovery
> method of breaking the boot process work on this router?
>
> Thanks,
>
> Rob Montgomery CCNA MCP
> Information Security Engineer
> IA Systems Analyst
> Sytex, Inc./ Naval Special Warfare Command
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>


_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]