Hi Jason,
Did you ever get an answer to this?
I am going insane - I thought I could look at my 3548-XL-EN real quick and
figure it out, but I can't even see what frame switching mode it is running.
I have been searching like a maniac on the CCO, but I have had no luck
whatsoever finding any information about how to [1] see what frame switching
mode running on the 35xx, [2] see what default frame switching mode is set
on the 35xx, or [3] how to change the frame switching mode on a 35xx.
I looked in my old ICND book from Cisco Press, but it only mentioned the
default mode on the 19xx. In my BCMSN book from Cisco Press I can't find
anything about it, and in my Cisco LAN Switching book by Clark, it mentions
what modes the Catalysts can run on page 61, but the 35xx is not included in
that table, so I guess it's too new???
Arrrgggg!!!!
If anyone know - please tell.
Thanks and have a great weekend,
Ole
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Ole Drews Jensen
Systems Network Manager
CCNA, MCSE, MCP+I
RWR Enterprises, Inc.
[EMAIL PROTECTED]
http://www.oledrews.com/ccnp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NEED A JOB ???
http://www.oledrews.com/job
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Jason Couch [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 29, 2000 8:28 AM
To: [EMAIL PROTECTED]
Subject: Catalyst 3512XL and fragment-free switching?
I can't find any docs on whether the Catalyst 3512XL can do fast forward or
fragment-free switching. Has anyone done this or can you point me in the
right direction in CCO?
Thanks,
Jason
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
