Hi..Dear all,
i wonder why I can ping to a site but when I do a traceroute stop half way..
I thought traceroute are based on ICMP as well?? See below
sin-uunet>ping 210.24.136.242
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 210.24.136.242, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 32/96/156 ms
sin-uunet>traceroute 210.24.136.242
Type escape sequence to abort.
Tracing the route to 210.24.136.242
1 Loopback0.GW2.SIN1.Alter.Net (210.80.0.25) 12 msec 12 msec 12 msec
2 322.ATM5-0-0.XR2.SIN1.Alter.Net (210.80.3.65) 8 msec 12 msec 8 msec
3 412.ATM8-0-0.GW1.SIN1.Alter.Net (210.80.3.62) 12 msec 12 msec 8 msec
4 202.95.96.30 20 msec 16 msec 16 msec
5 scipk017.pacific.net.sg (203.120.90.17) 12 msec 16 msec 16 msec
6 202.42.42.234 20 msec 92 msec 36 msec
7 * * *
8 * * *
9 * * *
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
