Use route map to specify which trafic should be routed to which interface. In
the routemap, use an access-list to determine the source and/or
source-destination, and I think it should be OK
On 05-Dec-00 Chris Sees wrote:
> Hi,
>
> If I have a router with 3 interfaces, 1 LAN , 2 WAN:
>
> Is there any way to specify a default route based on source IP address?
> In other words, for traffic coming from the LAN, there is a certain DEFAULT
> route. And for traffic coming from 1 of the WAN interfaces, there is
> another. ??
>
> Chris
>
>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
----------------------------------
E-Mail: Jean-Marc Gilbert <[EMAIL PROTECTED]>
Date: 05-Dec-00
Time: 23:09:37
----------------------------------
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
