On 06-Dec-00 Brian wrote:
> On Wed, 6 Dec 2000, mak wrote:
>
>> Hi all,
>>
>> I would like to know default is it OSPF already load-balancing?
>
> yes 4 equal cost paths by default.
>
>> Is it only true that, suppose when 1 to 1 router WAN connection?
>
> that sentence doesn't make any sense to me.
>
>> How about can I configure load-balancing when 2 to 2 routers WAN
>> connection?
>
> If the routes are learned over both links from the OSPF process, it will
> use both links automatically.
All this is true. But if I remenber, considering the switching mode on the
concerned interfaces, you will use per session load-balancing (fast
switching) or per packet load-balancing (process switching).
Jean-Marc
>
> Brian
>
>
>>
>> Thanks
>>
>> Regards,
>> mak
>>
>> _________________________________
>> FAQ, list archives, and subscription info:
>> http://www.groupstudy.com/list/cisco.html
>> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>>
>
> -----------------------------------------------
> Brian Feeny, CCNP+ATM, CCDP [EMAIL PROTECTED]
> Network Administrator
> ShreveNet Inc. (ASN 11881)
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
----------------------------------
E-Mail: Jean-Marc Gilbert <[EMAIL PROTECTED]>
Date: 06-Dec-00
Time: 20:36:35
----------------------------------
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
