It's just work after I put ip address in Tunnel I don't know why. Because I
had been use this feature before but for this version/26XX I just use this
feature in first time. I think may be this is bug of this version for 26XX.

Regards,
Arthayuth




> -----��ͤ����鹩�Ѻ-----
> �ҡ:  Elias Aggelidis [SMTP:[EMAIL PROTECTED]]
> �������:     7 �ѹ�Ҥ� 2543 13:14
> �֧:  [EMAIL PROTECTED]; [EMAIL PROTECTED]
> ����ͧ:       Re: apple talk and IPX tunnel in IP
> 
> It should work !
> 
> The way I am implementing tunnels is using source , destination the
> loopbacks
> of the boxes !
> 
> Added to that for just managment reasons I am putting an IP adress on the
> tunnel
> in order to see if the tunnel is up and running !
> 
> Regards
> Elias Aggelidis
> 
> CCNP + Voice
> ----- Original Message -----
> From: <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, December 06, 2000 4:01 PM
> Subject: apple talk and IPX tunnel in IP
> 
> 
> > Hi all,
> >
> > Are your guys have been work or set up lab about this feature.
> > I set up appletalk and IPX go to next router with 1 tunnel by encap with
> gre
> > ip.
> > I got problem. My tunnel is up line propotol is up but appletak and IPX
> > can't route together.
> > I use Cisco 26XX with version 12.0.4(T) for both unit. enterprise
> feature
> > and RAM 32MB.
> > If I use tunnel mode aurp is work for appletalk but not for IPX .
> > Here is my config:
> >
> > appletalk routing eigrp 3
> > appletalk route-redistribution
> > !
> > !
> > ipx routing 0003.e380.9d40
> > ipx internal-network 44
> > !
> > !
> > !
> > interface Tunnel4
> >  no ip address
> >  no ip directed-broadcast
> >  appletalk cable-range 48-48 48.85
> >  appletalk zone tunnel
> >  ipx network 48
> >  tunnel source Serial1/0
> >  tunnel destination 137.20.7.4
> > !
> > !
> > interface Serial1/1
> >  ip address 137.20.7.3 255.255.255.0
> >  no ip directed-broadcast
> >  decnet cost 10
> >  clockrate 128000
> >
> > and anoth box:
> >
> > appletalk routing
> > !
> > !
> > ipx routing 0003.e380.99c0
> > !
> > interface Tunnel4
> >  no ip address
> >  no ip directed-broadcast
> >  appletalk cable-range 48-48 48.33
> >  appletalk zone tunnel
> >  ipx network 48
> >  tunnel source Serial0/0
> >  tunnel destination 137.20.7.3
> > !
> > interface Ethernet0/0
> >  ip address 137.20.8.4 255.255.255.0
> >  no ip directed-broadcast
> >  appletalk cable-range 40-40 40.197
> >  appletalk zone R4
> >  decnet cost 4
> >  ipx network 40
> >  bridge-group 1
> > !
> > interface Serial0/0
> >  ip address 137.20.7.4 255.255.255.0
> >  no ip directed-broadcast
> >  no ip mroute-cache
> >  decnet cost 10
> >  no fair-queue
> >
> > =======================================================
> > Arthayuth  Boonruengrod
> > Network Consultant
> > CIP, CCNA, CCDA
> > Datacraft (Thailand) Ltd.
> > *14th Floor, Lake Rajada Building, Ratchadaphisek Road, Khlong-Toey,
> Bangkok
> > 10110
> > * [EMAIL PROTECTED]    http:\\www.datacraft-asia.com
> > * (662)264-0400, 661-9368 Ext# 104  Fax: (662)264-0405, 661-9488 *
> > (661)684-8548
> > =======================================================
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to