turn off hardware flow control (set it to no)
""Luke Everett"" <[EMAIL PROTECTED]> wrote in message
002101c0614a$4cb55400$[EMAIL PROTECTED]">news:002101c0614a$4cb55400$[EMAIL PROTECTED]...
> I have 3 different Cisco 2500 routers. When I boot them through =
> Hyperterminal I get what is below. It does not allow me to hit enter, =
> nothing happens. I have it configured as 9600 Baud, 8 Data Bits, parity =
> - none, 1 stop bit, flow control - hardware. It is the same for all =
> three of the routers. How can I get these routers running? I know they =
> work because I have used them with a laptop before. -=20
>
> Cisco Internetwork Operating System Software
>
> IOS (tm) 2500 Software (C2500-IS-L), Version 11.2(18), RELEASE SOFTWARE =
> (fc1)
>
> Copyright (c) 1986-1999 by cisco Systems, Inc.
>
> Compiled Mon 05-Apr-99 19:58 by jaturner
>
> Image text-base: 0x0302F3B0, data-base: 0x00001000
>
> cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of =
> memory.
>
> Processor board ID 02084157, with hardware revision 00000000
>
> Bridging software.
>
> X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
>
> 1 Ethernet/IEEE 802.3 interface(s)
>
> 2 Serial network interface(s)
>
> 32K bytes of non-volatile configuration memory.
>
> 8192K bytes of processor board System flash (Read ONLY)
>
> IP multicast fastswitching not allowed on X.25 interfaces
>
> IP multicast fastswitching not allowed on X.25 interfaces
>
>
>
> Press RETURN to get started!
>
>
>
> %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
>
> %LINK-3-UPDOWN: Interface Serial0, changed state to down
>
> %LINK-3-UPDOWN: Interface Serial1, changed state to down
>
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state =
> to down
>
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state =
> to down
>
> %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state =
> to down
>
> %SYS-5-CONFIG_I: Configured from memory by console
>
> %SYS-5-RESTART: System restarted --
>
> Cisco Internetwork Operating System Software
>
> IOS (tm) 2500 Software (C2500-IS-L), Version 11.2(18), RELEASE SOFTWARE =
> (fc1)
>
> Copyright (c) 1986-1999 by cisco Systems, Inc.
>
> Compiled Mon 05-Apr-99 19:58 by jaturner
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
