This URL explains it all....
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_5_4/msfc/mls.
htm#xtocid244531
Patrick
-----Original Message-----
From: Ben Hockenhull [mailto:[EMAIL PROTECTED]]
Sent: Monday, December 04, 2000 11:22 PM
To: Greene, Patrick
Cc: [EMAIL PROTECTED]
Subject: RE: More on VLANs
At 5:22 PM -0500 12/4/00, Greene, Patrick wrote:
>
>
>You need to enable routing for that VLAN interface with the mls command.
>
>
>Example
>interface vlan 200
>ip address 10.1.1.1 255.255.255.0
>mls rp vtp-domain <vtp_domain_name>
>mls rp ip
Hmmm. According to the docs, MLS is enabled by default on the MSFC. I did
enable mls rp ip on the interface and it had no effect. I was unable to
config mls rp vtp-domain as the MSFC muttered something about a null domain.
Ben
--
Ben Hockenhull
[EMAIL PROTECTED]
"Revenge is a dish best served with pinto beans and muffins."
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
