What kind of MAU? Usually you need a straight through cable. And, if its one
of the old IBM MAUs, make sure you are not connecting to the far left or far
right ports, they are for Ring In and Ring Out only, not station
connections. Also, try a different port, sometimes the relays stick shut.
---JRE---
""Hubert Pun"" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> According to the Token Ring section of the certificateZone.com, there is
> no "no keepalive" equivalent. I need to connect to the MAU to get the
> interface be up/up.
>
> I have tried that and it does not work. I have set the "ring speed 16"
> already. does anyone know why? And what kind of cable to connect to
> MAU? cross over or straight through?
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
