The 2503 BRI interface is S/T. On most of the Cisco
gear that I have seen with U interfaces it is labeled
"ISDN U" or similar.
Heres output from a Cisco 800 w/12.1(5)T code:
show int bri0
BRI0 is administratively down, line protocol is down
Hardware is BRI with U interface and POTS
2620 w/12.0(3)T3:
show int bri1/0
BRI1/0 is administratively down, line protocol is down
Hardware is BRI
2620 'show diag' output:
Slot 1:
BRI (S/T) port adapter, 4 ports
There may be some other ways to determine interface
type from the CLI besides the above. It may vary in
IOS version as well because newer versions may provide
more details then previous versions.
--- Samuel P <[EMAIL PROTECTED]> wrote:
> Hi Folks
>
> How do I identify if an ISDN port on a 2503 router
> is an "S/T or a "U"
> interface.
> Either by physical verification or using the CLI.
> The port on the router
> says ISDN BRI.
> Could someone please help me out.
>
> Thanks
>
> SP
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
