yes you can use to DB60 connectors to make a V.35 cross cable, its called
a null modem cable ...get the pinouts from cisco's web site and (for the
DCE and DTE) instead of the M34 Venchester connect the wires directly.
Babar Hameed
Network Engineer
Unisys Pakistan.
>
> --- Nomi <[EMAIL PROTECTED]> wrote:
> > Is it possible to connect Serial interface of a
> > single router back to =
> > back (using cable DB-60 --->V35 than roll over or
> > cross cable V35 =
> > <---DB-60) .
> >
> > Is there any another way of doing this, if so plz
> > let me know. I am =
> > really greatful to you
> >
> > Nomi
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
