You can if you do a little coorelating. Note the MAC
address in the CAM table for the port. Telnet to the
router that serves the VLAN and query the ARP table.
Chris M.
--- "Sim, CT (Chee Tong)"
<[EMAIL PROTECTED]> wrote:
> Dear all,
>
> can I tell the ip of the PC that connected to a
> switch port? what is the
> command?
>
> Tong
>
>
==================================================================
> De informatie opgenomen in dit bericht kan
> vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien
> u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet
> te gebruiken en
> de afzender direct te informeren door het bericht te
> retourneren.
>
==================================================================
> The information contained in this message may be
> confidential
> and is intended to be exclusively for the addressee.
> Should you
> receive this message unintentionally, please do not
> use the contents
> herein and notify the sender immediately by return
> e-mail.
>
>
>
==================================================================
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
