Hi,
If I understand correctly.
go to your controller and setup the time slots.
controller E1 1
pri-group timeslots 1-21
It looks something like that.
Teunis,
Hobart, Tasmania
Australia
O
n Thursday, December 14, 2000 at 11:42:13 PM, ItsMe wrote:
> Channel-group is how you specify the 24 64K channels/ T1
>
> ""James Haynes"" <[EMAIL PROTECTED]> wrote in message
> 918osp$l1i$[EMAIL PROTECTED]">news:918osp$l1i$[EMAIL PROTECTED]...
> > Does anyone know the difference between these two settings. I'm looking at
> a
> > Router that has T1 controllers on it set for pri-groups and one controller
> > that is set for a channel-group. I realize the pri-groups follow the setup
> I
> > learned for the Remote Access test, however I don't remember seeing a
> > channel-group command and searching the Cisco website just keeps giving me
> > the command syntax for channel-group. which, by the way, looks alot like
> > pri-group.
> > Thx.
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
