If you assign a private ip address for your internal network. You need to
enable NAT/PAT. Check this link
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_v52/config/con
fig.htm
If you have public ip address in your internal network, apply conduit for
icmp. Hope this help.
Alfred
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
mansoor
Sent: Friday, December 15, 2000 3:59 AM
To: [EMAIL PROTECTED]
Subject: PIX and DSL HELP
Hi everyone
I'm trying to configure a PIX-506 firewall and DSl router
anybody a (show config) from his/her PIX or any suggestion
I can ping outside ip(external ip on PIX) from outside and ping inside
ip(internal ip on PIX) from inside office
but can not ping from pc (inside the company} outside world , default
gataway and outside IP on Pix
I can ping gatway and any hoists and internet from PIX
any advice
George
Thank you
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
