On Tue, 19 Dec 2000, Sim, CT (Chee Tong) wrote:
> Hi.. Dear all,
>
> May I know how to turn on the ip accounting on router? I know there is a
> command "sh ip cache flow" to view what kind of traffic passing thru the
> router. But what is the command to turn it on in order to view sh ip cache
> flow. Can all type of routers support "sh ip cache flow" ? How about 1700
> series?
most low end routers do not support flow. I don't know about 1700's, I
doubt it. 3600's do.........7000's don't, 7200's do.......
for ip accounting you just do "ip accounting" in the interface
configuration. Then "show ip accounting". You can clear it out as well.
Brian
>
> Tong
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
Brian Feeny, CCNP+ATM, CCDP [EMAIL PROTECTED]
Network Administrator
ShreveNet Inc. (ASN 11881)
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
