But remember, you have to do full iBGP peering inside your AS. When you have
two routers, it wouldn't be a problem for no IGP.
When you have more than two, unless they are connected by a share medium
(such as Ethernet) and peer using the connected interface, otherwise, you
have to make some intra-AS routing (by static route, for example.) before
you can do full peering. Remember, there should be a level 3 connectivity
before any BGP peering to occur.
That my 0.02.
"Dan West" <[EMAIL PROTECTED]> wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Is it possible to run IBGP as the ONLY IGP for a
> particular network (AS)??
>
> I know all routers would know about outside networks,
> but how about different internal areas knowing about
> what other networks are advertising
>
> BGP seems so capable that it could almost be done
> without OSPF, EIGRP, etc....
>
> thanks.
>
> =====
> Dan West -- CCNA, CCNP (in progress)
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Thousands of Stores. Millions of Products.
> http://shopping.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
