hi 
i hav a 64 kb leased link and while monitoring link
load it show following readings, but i am not able to
understand 
that how it can exceed 64 kbits /sec.which the the
actual bw. or is there any problem in my
understanding.....pls tell 
me.............
******************************************************************************
Hardware is CD2430 in sync mode
  Internet address is 10.254.2.25/30
  MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely
255/255, load 23/255
  Encapsulation HDLC, loopback not set, keepalive set
(10 sec)
  Last input 00:00:00, output 00:00:00, output hang
3d23h
  Last clearing of "show interface" counters 3w6d
  Queueing strategy: fifo
  Output queue 0/40, 26596 drops; input queue 0/75, 0
drops
  5 minute input rate 62000 bits/sec, 8 packets/sec
  5 minute output rate 6000 bits/sec, 13 packets/sec
     11383396 packets input, 1557074354 bytes, 0 no
buffer
     Received 606899 broadcasts, 0 runts, 6 giants
     33798 input errors, 25476 CRC, 0 frame, 65
overrun, 0 ignored, 6357 abort
     15716155 packets output, 2267344110 bytes, 0
underruns
     305 output errors, 0 collisions, 133 interface
resets
     0 output buffer failures, 0 output buffers
swapped out
     15174 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up
******************************************************************************


__________________________________________________
Do You Yahoo!?
Yahoo! Shopping - Thousands of Stores. Millions of Products.
http://shopping.yahoo.com/

_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to