Christopher,
Well, done a great achievement - especially 90% - you have just put up the
pass mark for those about to take the test !
Regards,
Craig
I'm going through my studying f
Christopher Larson <[EMAIL PROTECTED]> wrote in message
61E62C3E8898D311BBE20050DA13E3F61BE24B@NTMAIL">news:61E62C3E8898D311BBE20050DA13E3F61BE24B@NTMAIL...
> I recently took the written. There is a LOT of bridging. Know your
> briding, know your RIF's, know DLSW, and that the rif terminates at the
> router. Know how to read the Route Descriptor and convert from TR to
> Ether MAC.
>
> Know who retransmits when there is an error on a serial link. HDLC,
> FRAME, etc host would retransmit. X.25 or anything with LAPB, the router
> would retransmit.
>
> I would recommend in addition to your studies and the famous bokks
> (Halabi's BGP, Caslow, Doyle, etc) that you also download and read
>
> http://www.sitamoht.com/cciewe.html
>
> Get the Token ring whitepaper that is there also. This was extremely
> usefull!!!
>
>
> Also, go through all the chapter summary questions fomr the Cisco Press
> CCNA book as there are some things on the test that are relatively
> low-level that you may have forgotten.
>
> Thanx again to the group!!!!!
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
