It has been running fine for past 6 months with same IOS and we have =
not
changed any thing on the router recently. I am=A0suspecting flash =
memory or
mem on VIP card. We do have SLA with Cisco,=A0 talked to=A0TAC and they
do not think it's IOS cos 12.07T is solid and stable IOS.=20
The router has PRI module and VIP2 but only one of PRI is being used.=20
Last week, it went down 3 times in day so don't know what's going with =
it.
IOS won't even recognize VIP 50 card Cisco sent us and we put old one
back.
I will try booting without config and see what happens..
=A0
Thanks for help
=A0
Inamul
=A0
=A0
=A0-----Original Message-----
From: Bowen, Shawn [mailto:[EMAIL PROTECTED]]
Sent: Thursday, December 21, 2000 1:11 PM
To: Desai, Inamul; [EMAIL PROTECTED]
Subject: RE: 7505 Reboots randomly Please HELP
This is an issue with 12.07T, I have seen it a lot with AS5800's =
running
this code.=A0 Boot without a config let it get FULLY booted, then copy =
start
to run.=A0 This works for us, as it seems the router does not fully get
initialized before certain configurations get loaded.=A0 Also, it seems =
that
console logging on the 5800 is what kills it when it runs out of memory
after initializing all the modems on the 5800's(1400 of em!).=A0 Like I =
said,
I know why this happens on 5800s, I'm assuming the issue is following =
to the
7505's.=A0 One other note, if you have the back plane oversubscribed =
with
certain cards it will do this as well.
Shawn=20
-----Original Message-----=20
From: [EMAIL PROTECTED] [ mailto:[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]> ]On Behalf Of Desai, Inamul=20
Sent: Thursday, December 21, 2000 3:03 PM=20
To: [EMAIL PROTECTED]=20
Subject: 7505 Reboots randomly Please HELP=20
We got 7505 router reboots randomly twice a week or=20
when you write to config file. We gone thru changing=20
VIP card, resetting all cards, resetting mem modules, swapping=20
mem modules on VIP card, powering up and down and talked to Cisco.=20
It's running IOS 12.0(7)T with RSM, VIP2 and one PRI module.=20
No matter how many times you cold boot it, it brings all=20
enable LEDs except one on fastEthenet card. It does help=20
some time when I reset FLASH cards.=20
D u think it's flash cards ?=20
here is startup info:=20
System Bootstrap, Version 5.3.2(3.2) [kmac 3.2], MAINTENANCE INTERIM=20
SOFTWARE=20
Copyright (c) 1994 by cisco Systems, Inc.=20
RSP processor with 131072 Kbytes of main memory=20
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC=
CCCC
CCCC=20
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCreading the file into memory...=20
Self decompressing the image :=20
#################################################=20
########################################################################=
####
####=20
################################################################### =
[OK]=20
%DBUS-3-SW_NOTRDY: DBUS software not ready after HARD RESET, elapsed =
12032,=20
stat=20
us 0x0=20
-Traceback=3D 60192B5C 60195A84 60195B3C 6015444C 601546C8 60128990 =
600109B0=20
%DBUS-3-SW_NOTRDY: DBUS software not ready after HARD_RESET, elapsed =
12032,=20
stat=20
us 0x0=20
-Traceback=3D 60192B5C 60194BA0 60195008 6019845C 600F4E64 600F4ECC =
600E9090=20
600E9=20
298 600EA3B0 600EA39C=20
%DBUS-3-SW_NOTRDY: DBUS software not ready after RESET, elapsed 12032,=20
status 0x=20
40=20
-Traceback=3D 60192B5C 60194EC0 60191AF4 60195054 6019845C 600F4E64 =
600F4ECC=20
600E9=20
090 600E9298 600EA3B0 600EA39C=20
System Bootstrap, Version 5.3.2(3.2) [kmac 3.2], MAINTENANCE INTERIM=20
SOFTWARE=20
Copyright (c) 1994 by cisco Systems, Inc.=20
RSP processor with 131072 Kbytes of main memory=20
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC=
CCCC
CCCC=20
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCreading the file into memory...=20
Self decompressing the image :=20
#################################################=20
########################################################################=
####
####=20
################################################################### =
[OK]=20
%CBUS-3-CCBPTIMEOUT: CCB handover timed out, CCB 0x5800FF50, slot 3=20
-Traceback=3D 601A5348 601A398C 601A3E3C 6019D4F0 600EE70C 600F4EFC =
600E9090=20
600E9=20
298 600EA3B0 600EA39C=20
%LINK-4-NOMAC: A random default MAC address of 0000.0c9a.31e7 has=20
been chosen. Ensure that this address is unique, or specify MAC=20
addresses for commands (such as 'novell routing') that allow the=20
use of this address as a default.=20
%SYS-4-CONFIG_NEWER: Configurations from version 12.0 may not be =
correctly=20
under=20
stood.CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC=
CCCC
CCCC=20
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC=20
%CBUS-3-MIPSTAT: Out of buffers--losing status information for the MIP=20
cardCCCCC=20
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC=
CCCC
CCCC=20
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC=
CC=20
_________________________________=20
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
<http://www.groupstudy.com/list/cisco.html> =20
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]=20
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
