Try upgrading to SP6a. I think there are some problems with SP5 (regardless
of what the documentation on the Cisco web site says.
Dave
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Vicky Chappel
Sent: Thursday, December 21, 2000 2:09 PM
To: [EMAIL PROTECTED]
Subject: Cisco VPN concentrator
I am having trouble configuring VPN client on NT4.0/SP5 notebooks. Its
really
weird. I am using NT domain authentication. When I use the VPN dialer it
goes
through NT authentication successfully and establishes secure connection. I
can monitor the session on concentrator. But still I can not ping any hosts
or
browse the NT network on the subnet from the notebook. I get the IP address
from the concentrator pool. The hosts I am trying to ping are on same
subnet.
The win9x client works fine with the same group that is configured on
concentrator. Has some one experienced this problem with Cisco VPN
concentrator (ATIGA series3000). Any help is greatly appreciated.
____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
