Figured out my problem. had no keepalives on the serial interfaces
(sigh)..dj
""D. J. Jones"" <[EMAIL PROTECTED]> wrote in message
921i6k$nej$[EMAIL PROTECTED]">news:921i6k$nej$[EMAIL PROTECTED]...
> Anyone have any problems with a 4500 retaining router configs using 11.2
or
> 12.0.7 IOS? I initially was trying to set up a simple frame relay switch
> and entered 'frame-relay lmi-type ansi' which worked intially. However
when
> I run a 'sh conf' the commands are not there. I've even re-entered them
> several times with no success. thanks..dj
>
> BTW, I've reloaded the IOS and the boot image.
>
> Meantime, I'll search the archives.
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
