If you specify a physical interface such as bri 0, then the physical
interface is placed into standby and is unusable for any other purpose. The
way you get around this problem is to use dialer profiles so that the
logical dialer interface is placed into standby instead, leaving the actual
physical interface free to use for another purpose.
Regards,
David Wolsefer, CCIE #5858
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Groupstudy
Sent: Wednesday, December 27, 2000 10:21 AM
To: [EMAIL PROTECTED]
Subject: Interface backup
Once you make a BRI interface a backup to say a serial interface, does =
it lock it down so that it is not useable for any other purposes?
eg:
interface serial 0
backup load 60 5
backup interface bri 0
Cheers.
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
