You will need somthing that reads "FE" before you can go full-duplex.
Best of Luck
Phil
----- Original Message -----
From: "Darren Ward" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 28, 2000 8:57 AM
Subject: 3600 Ethernet Question
> Hi All,
>
> Here's a question for one and all.....
>
> A 3640 with a 1E2W running Enterprise IOS 11.3.8 does not have the
> full-duplex command available for the ethernet.
>
> However a different 3640 with a 4E card running IP Plus IOS 12.0.7T does
> support the full-duplex command on the ethernet ports.
>
> The question I have since I can't find it with a search on CCO is if the
> support for 'full-duplex' is based on the card or the IOS?
>
> Darren Ward
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
