What problems are you having with the inactivity
timers? I'd recommend leaving them at default on the
Bay unless there is a problem involving them. Do you
have any Bay log entries stating a problem that you
can show me? I would change the OSPF MTU size on the
Bay interface from 1 (the default) to the actual MTU
on that interface. 1 means learn the MTU from the
physical interface and this isn't done accurately all
the time and I've seen it cause problems with other
vendors equipment as well as connecting to other Bay
routers.
On the Bay you can use Site Mangler and look under
Protocols -> IP -> OSPF Interface and global to adjust
the values and settings.
You can also use the MIBs to do it. The exact MIB
objects will vary depending on the version of BayRS.
If you need further assistace with the MIBs let me
know and I can help you. Let me know what version of
code you have.
--- "Cooper, David" <[EMAIL PROTECTED]> wrote:
> Howard and group...
> Anyone know where can I find the recommendations for
> tuning the
> timers(hello,dead, retransmit etc) on the OSPF
> process on NBMA and P to P
> links (frame relay) on Bay Routers?. I am having a
> problem with inactivity
> timers and I read in your book Mr. Berkowitz about
> the Bay recommendations
> but was curious were I could find those you cited in
> your book. Thanks in
> advance.
__________________________________________________
Do You Yahoo!?
Yahoo! Photos - Share your holiday photos online!
http://photos.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
