Hi,
You're on :
Config whith username - password works for chap, and config whith ppp pap
sent-username works for pap.
Hope this helps,
Jean-Marc
On 29-Dec-00 Sam wrote:
> Adam
>
> I was able to figure out how to get it to work. I did have PAP configured on
> both routers.
> Username R1 was configured on R2
> and username R2 was configured on R1
> Both had the same password "cisco"
>
> Debug ppp auth gave absolutely no clue why it wasnt working..
> Then I ran "debug ppp negotiation" and found that there was a line which
> said "remote site failed to authenticate"..
> Did some digging up on the DOC CD and with the help of Jim Dixon who
> responded to my call for help,
> I added a line "ppp pap sent-username R1 password 0 cisco" to R1
> and a line "ppp pap sent-username R2 password 0 cisco" to R2
> That did the trick.
>
>
> With exactly the same config and with CHAP, it was working correctly. The
> moment I changed it to PAP on both routers, authentication failed. According
> to my understanding, PAP is just sending cleartext. So why did I have to add
> the line
> "ppp pap sent-username". I am still not clear about this.
> Any ideas?
>
>
>
>
> ----- Original Message -----
> From: "Adam Quiggle" <[EMAIL PROTECTED]>
> To: "Sam" <[EMAIL PROTECTED]>
> Sent: Thursday, December 28, 2000 9:40 PM
> Subject: Re: ISDN and PAP
>
>
>> Sam,
>>
>> Both routers must have PAP authentication configured. You said that
>> you only changed the statement on one of the routers and not both of
>> the routers. Try changing the statement on both routers and see what
>> kind of success you have.
>>
>> HTH,
>> AQ
>>
>> At 02:35 PM 12/28/00, you wrote:
>> >Hello friends
>> >
>> >I am trying to set up ISDN and PAP authentication on my routers and it
>> >doesnt seem to work. Router R1 dials to R2 but then the call gets
>> >disconnected.
>> >If I take out the line for "ppp auth pap"
>> >and put in "ppp auth chap" the call goes through fine and the connection
> is
>> >made.
>> >I have defined a username/password for the far_end_router on both
> routers.
>> >Debug ppp authentication shows no errors.
>> >
>> >Could some one tell me what I am missing. I can post my configs if
> required
>> >
>> >Thanks
>> >
>> >Sam
>> >
>> >_________________________________
>> >FAQ, list archives, and subscription info:
>> >http://www.groupstudy.com/list/cisco.html
>> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>>
>>
>> **************************************************
>> Adam Quiggle
>> Senior Network Engineer
>> MCI Worldcom/NOC/BP Amoco
>> [EMAIL PROTECTED]
>> **************************************************
>>
>>
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
----------------------------------
E-Mail: Jean-Marc Gilbert <[EMAIL PROTECTED]>
Date: 29-Dec-00
Time: 20:39:08
----------------------------------
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
