Hi,
Does a port really know what is happening as long as each end connected agree on
speed, duplex settings, addressing etc. I can't see that the port would know it is
not being used as an up port.
Teunis
Hobart Tasmania
Australia
On Friday, December 29, 2000 at 09:45:45 AM, Watson. Rick. . OUSDC wrote:
> Knowing that this is NOT common practice but a client asked if it was
> possible to buy the Gigabit uplink module for the Sup III module, and then
> proceed to hook up servers to the uplink ports and use a port on a linecard
> as the uplink (FE). This is, in his opinion, a way to save from spending the
> money on a GB line card. Thanks for the insight. I am currently looking on
> CCO, but thought I'd put it out here for thought also.
>
> Rick Watson
> Network Engineer
> OUSD(Comptroller)
> 703.697.5710
> [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
