Hi,
We provide a service to thousands of clients with anything from full class "B" to 4
addresses out of a class "C". In a nutshell you place a default static back to the
supplier. The supplier has a static pointing your class "C" down your link.
In a number of places this is managed by auto type processes for example going into a
customer area and adding the routes you own to your service. The process then updates
the router from the supplier to you.
Teunis
Hobart, Tasmania
Australia
On Saturday, December 30, 2000 at 07:49:57 AM, gary gary wrote:
> Hi guys:
> We are a small ISP, just using static routing connect
> the mother ISP, the mother ISP assign a class C
> address to us, I want to know how the mother ISP
> locate the Class c networking , just using static
> routing? Need they redistribute the static to their
> dynamic routing (for example OSPF) in order to the
> internet router know the class c network,?
> Did the mother ISP create the stub area, then assign
> the lots of ip address to stub area ,if so how to
> create the stub area by static routing? Anyone can
> give me some configuration,
>
>
> Thanks in advice
>
>
>
> gary
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos - Share your holiday photos online!
> http://photos.yahoo.com/
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
