Hi All,
I suggest first you should make sure that the modem is having S0 register as 1. If the
modem have a front panel you can check it by see the setting ANSWER=RING #1 (well, it
is
in the Motorola Codex 3266). If not, try to connect the modem to a PC and do
hyperterminal to COM1 and then type :
ats0=1
at&w
at&y
And then while in hyperterminal and connect to the modem, dial the modem from another
computer, you should see RING on hyperterminal and then connect.
Second you must make sure the modem is well connected to router. You can do this by
telnet to router port 2001 and then do
at
at&v
If there is a response then psysical connection is OK.
Third do 'sh users' on router. If you see any aux line appear, then it mean the router
is busy trying to find out the modem type and you must clear the line. or you can put
'modem autoconfigure discovery' command.
Hope will help
-ivan-
David Nie wrote:
> you should configure your modem to "auto answer"
>
> ""Austin"" <[EMAIL PROTECTED]> wrote in message
> 92ssgt$rg2$[EMAIL PROTECTED]">news:92ssgt$rg2$[EMAIL PROTECTED]...
> > I have a Cisco 2511 Access Server.
> > I want to connect to the 2511 via Modem. I have an old Motorola 14.4
> modem.
> > The aux port has the ffg config:
> >
> > line aux 0
> > login
> > password cisco
> > modem inout
> > transport input all
> >
> > I have the phone line plugged into the Modem (where it says TO WALL) and I
> > have the Parallel connector (Modem) from Cisco's console kit plugged into
> > the Modem Parallel Port. Then I have a regular Cisco console cable running
> > from the modem to the aux port.
> >
> > When I call the number it just rings and rings. The modem does not answer.
> > What am I doing wrong or what am I not doing?
> > All help appreciated.
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
