Are you asking if they can use the same interface card, or whether they have
the same physical interface/voltage levels etc. The first two being balanced
protocols and RS232 being unbalanced they are quite different and have
different physical interfaces, but I believe they can use interface cards
such as WIC1T as long as the relevant cable is used.
""mikey"" <[EMAIL PROTECTED]> wrote in message
92p2qm$mp5$[EMAIL PROTECTED]">news:92p2qm$mp5$[EMAIL PROTECTED]...
>
> No
>
> John lay <[EMAIL PROTECTED]> wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Guys,
> >
> > are the V.11, X.21 and the RS232 are the same interface.
> >
> > Thanks
> >
> >
> >
> >
> >
> > _______________________________________________________
> > Send a cool gift with your E-Card
> > http://www.bluemountain.com/giftcenter/
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> >
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
