Ran into this problem while doing my lab. If you don't have dialer group command
defined, then there will be no interesting event to trigue the call. Make sure enter
dialer group command and proper access-list
Mingzhou
ahmad wrote:
> Dear all,
>
> i am setting up an end-to-end isnd connection between two routers using CHAP
> athuentication.i seem to make a connection but cant ping even the local side
> the show ip route shows it as directly connected interface,when i do show
> int bri 0 i see (spoofing)what actually does it mean and how to get rid of
> it ??i have checked the configurations and searched on net a lot
> configuration seems alright.if possible can someone send me a practical
> working config (offcourse ips and passwords omitted).??
>
> i realy would appreciate it.following is a general skecth just for refernce.
>
> following is the configuration
>
> Router 1:
>
> hostname 3600-1
> username 2600-1 password google
>
> int bri 0
> ip address 10.10.10.1 255.255.255.0
> encapsulation ppp
> dialer map ip 10.10.10.2 name 2600-1
> ppp authentication chap
> -----
>
> Router 2:
>
> hostname 2600-1 password google
>
> int bri 0
> ip address 10.10.10.2 255.255.255.0
> encapsulation ppp
> dialer map ip 10.10.10.1 name 3600-1 1267126
> ppp authentication chap
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
--
| | Mingzhou Nie
:|: :|: Customer Support Engineer
:|||||: :|||||: TAC, RTP, NC
.:|||||||||:.:|||||||||:. Tel/Fax: 919.392.4732
C i s c o S y s t e m s Email: [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
