For archive purposes:
There are known issues with syslog in IOS 12.1.5
Now only if CCO would get a better search engine ;-(
Tim
""Timothy Metz"" <[EMAIL PROTECTED]> wrote in message
935462$jvh$[EMAIL PROTECTED]">news:935462$jvh$[EMAIL PROTECTED]...
> Hi All,
>
> Ever since I upgraded to 12.X I have been unable to get them logging again
> to the syslog daemon on my server. Other things are logging fine so I know
> theres no problem with it. It did work fine with 11.X, I've searched CCO
and
> can't find anything I didn't already know. One router is a 2501, the other
a
> 2505. Here's one of the config's, I'd appreciate any help you all could
> offer.
>
> Thanks
>
> Tim
>
>
> Building configuration...
>
> Current configuration : 2190 bytes
> !
> ! Last configuration change at 18:15:32 CET Fri Jan 5 2001
> !
> version 12.1
> service timestamps debug datetime msec localtime show-timezone
> service timestamps log datetime msec localtime show-timezone
> service password-encryption
> !
> hostname Access2505
> !
> boot system flash
> logging buffered 10000 debugging
> no logging console
> enable secret 5 xxxxxxxxxxxxxxxxxxxx
> enable password 7 xxxxxxxxxxxxxxxxxxx
> !
> !
> !
> !
> !
> clock timezone CET 1
> ip subnet-zero
> no ip finger
> ip name-server 212.185.252.73
> ip name-server 194.25.2.129
> !
> ip multicast-routing
> frame-relay switching
> cns event-service server
> !
> !
> !
> # irrevelent hub ether stuff removed
> !
> !
> interface Ethernet0
> ip address 192.168.0.252 255.255.255.0
> ip pim sparse-dense-mode
> ip multicast ttl-threshold 16
> no ip route-cache
> no ip mroute-cache
> !
> interface Serial0
> bandwidth 4000
> ip address 192.168.10.252 255.255.255.0
> ip pim sparse-dense-mode
> ip multicast ttl-threshold 16
> encapsulation frame-relay
> no ip route-cache
> no ip mroute-cache
> fair-queue
> clockrate 4000000
> cdp enable
> frame-relay interface-dlci 192
> frame-relay intf-type dce
> !
> interface Serial1
> no ip address
> no ip route-cache
> no ip mroute-cache
> shutdown
> !
> router rip
> version 2
> network 192.168.0.0
> network 192.168.10.0
> !
> ip classless
> no ip http server
> ip pim rp-address 192.168.20.253
> ip pim send-rp-announce Ethernet0 scope 16
> ip pim send-rp-announce Serial0 scope 16
> ip pim send-rp-discovery Serial0 scope 16
> !
> logging facility syslog
> logging 192.168.0.2
> access-list 5 deny 192.168.0.3
> access-list 5 permit any
> !
> snmp-server community xxxxxx RO
> snmp-server community xxxxxxxx RW
> !
> line con 0
> exec-timeout 5 0
> password 7 xxxxxxxxxxxxx
> logging synchronous
> login
> transport input none
> line aux 0
> transport input all
> line vty 0 4
> exec-timeout 5 0
> password 7 xxxxxxxxxxxxxxxxxx
> logging synchronous
> login
> !
> ntp clock-period 17179719
> ntp server 192.43.244.18
> end
>
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
