We have a winner !!!
The syntax for the keepalive interface subcommand is:=20
keepalive [seconds]
no keepalive=20
If the optional argument seconds is not specified, a default of ten =
seconds is assumed.
Example:
In the following example, the keepalive interval is set to three =
seconds.
interface ethernet 0
keepalive 3
Thanks !!!
Phil
----- Original Message -----=20
From: "ElephantChild" <[EMAIL PROTECTED]>
To: "Circusnuts" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Saturday, January 06, 2001 7:01 PM
Subject: Re: Can I Change the Interface Updating Intervals ???
> On Sat, 6 Jan 2001, Circusnuts wrote:
>=20
> > Is there a setting that has a router poll itself more often, say for
> > connectivity. I have a router in my lab, that seems to take a =
minute
> > just to change status from UP to Down (& vise versa). Debug is =
equally
> > slow...
>=20
> Is "keepalive" what you're looking for?
>=20
> --=20
> "Airplane travel is nature's way of making you look like your passport
> photo." --- Al Gore
>=20
> _________________________________
> FAQ, list archives, and subscription info: =
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
