Try using the 'slave reload' command.
-----Original Message-----
From: STRAND Scott [mailto:[EMAIL PROTECTED]]
Sent: Friday, January 12, 2001 2:54 PM
To: [EMAIL PROTECTED]
Subject: RSP Swap (Master to Slave)
I have a 7507 with dual RSP cards (1 master, 1 a slave). Is there a command
to logically switch an RSP from a master to a slave. I
know I can physically pull out the master and the slave will automatically
become the master....is there a logical command to do
this?
Thanks,
Scott
CCNP
_________________________________
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
