I connect a AS5300 (4 E1/PRI) with a PRI line from the switch,
after I"deb isdn q931""deb isdn q921",i run "csim start ***********"to
simulate a call,and i got the following result,and the call setup failed,
why?
1d03h: ISDN Se0:15: RX <- SABMEp c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: TX -> UAf c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: RX <- SABMEp c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: TX -> UAf c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: RX <- SABMEp c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: TX -> UAf c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: TX -> INFOc sapi = 0 tei = 0 ns = 0 nr = 0 i =
0x080200
2A0504038090A31803A9839F7009803632303836353439
1d03h: SETUP pd = 8 callref = 0x002A
1d03h: Bearer Capability i = 0x8090A3
1d03h: Channel ID i = 0xA9839F
1d03h: Called Party Number i = 0x80, '62086549', Plan:Unknown,
Type:Unkn
own
1d03h: ISDN Se0:15: RX <- SABMEp c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: Event: Syncing Discards: L2 Discards 124, L2D_Task
Counter 1
23
1d03h: ISDN Se0:15: RX <- SABMEp c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: TX -> UAf c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: RX <- SABMEp c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: TX -> UAf c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: RX <- SABMEp c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: TX -> UAf c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: TX -> INFOc sapi = 0 tei = 0 ns = 0 nr = 0 i =
0x080200
2A0504038090A31803A9839F7009803632303836353439
1d03h: SETUP pd = 8 callref = 0x002A
1d03h: Bearer Capability i = 0x8090A3
1d03h: Channel ID i = 0xA9839F
1d03h: Called Party Number i = 0x80, '62086549', Plan:Unknown,
Type:Unkn
own
1d03h: ISDN Se0:15: TX -> INFOp sapi = 0 tei = 0 ns = 0 nr = 0 i =
0x080200
2A0504038090A31803A9839F7009803632303836353439
1d03h: SETUP pd = 8 callref = 0x002A
1d03h: Bearer Capability i = 0x8090A3
1d03h: Channel ID i = 0xA9839F
1d03h: Called Party Number i = 0x80, '62086549', Plan:Unknown,
Type:Unkn
own
1d03h: ISDN Se0:15: RX <- SABMEp c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: Event: Syncing Discards: L2 Discards 125, L2D_Task
Counter 1
24
1d03h: ISDN Se0:15: RX <- SABMEp c/r = 1 sapi = 0 tei = 0
1d03h: ISDN Se0:15: TX -> UAf c/r = 1 sapi = 0 tei = 0
if i just "deb isdn event" i got the following
1d03h: ISDN Se0:15: Outgoing call id = 0x802D, dsl 0
1d03h: ISDN Se0:15: process_pri_call(): call id 0x802D, number 62086443,
speed -
1, call type VOICE
1d03h: building outgoing channel id for call nfas_int is 0 len is 0
1d03h: ISDN Se0:15: Event: Syncing Discards: L2 Discards 112, L2D_Task
Counter 1
11
1d03h: ISDN Se0:15: Event: Syncing Discards: L2 Discards 113, L2D_Task
Counter 1
12
csim err csimDisconnected recvd DISC cid(38)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
cisco#
1d03h: CC_CHAN_ReleaseChanpri for DSL 0 B-chan 31
1d03h: CCPRI_ReleaseChan released b_dsl 0 B_Chan 31
1d03h: ISDN Se0:15: CCPRI_ReleaseCall(): bchan 0, call id 0x802D, call type
VOIC
E
1d03h: ISDN Se0:15: LIF_EVENT: ces/callid 1/0x802D CALL_REJECTION
1d03h: ISDN Se0:15: LIF_EVENT: ces/callid 1/0x802D CALL_CLEARED
1d03h: ISDN Se0:15: Got a disconnect on a non-existent call (call id =
0x802D).
1d03h: This probably is a call that we placed that never got answered.
1d03h: ISDN Se0:15: ISDN_DISCON Voice cid 802D error
1d03h: ISDN Se0:15: Event: Syncing Discards: L2 Discards 114, L2D_Task
Counter 1
13
what does "Syncing Discards"mean,and i am sure my dialplan is right and the
called number
does exist.
Thanks
Frank
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
