Cheng,
"set port ena (mod/port)"
Just a hint, make sure there is something connected to the port.
Best of luck.
-Scott
"Cheng Chee Woon" <[EMAIL PROTECTED]> wrote in message
4176F37FBF9DD411B38700306E011454815712@JOSEXCHG">news:4176F37FBF9DD411B38700306E011454815712@JOSEXCHG...
> Hi, can anyone tell me how to activate a port on catalyst 5509 ? If I do
a
> "show port" on the CLI, this is the result that I get :
>
> 4/1 notconnect 2 normal full 1000 No GBIC
> 4/2 inactive 3 normal full 1000 No GBIC
> 4/3 inactive 1 normal full 1000 No GBIC
> 5/1 notconnect 1 normal auto auto
> 10/100BaseTX
> 5/2 notconnect 1 normal auto auto
> 10/100BaseTX
>
> Thanks,
>
> Cheng Chee Woon
> Network Consultant
> JOS Systems Sdn Bhd
> Fax : 03-7880 5223
> DID : 03-7883 6803
> email : [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
