Hi,
Im stumped with this problem. Got a 801 configured with dialer profiles,
there are 2 dialers set up, they both work fine dialing out. The problem is
when the other routers (a shiva and a 3620) try to dial in. I can see a
connection coming in, but the 801 just seems to drop the call. With debug
ppp authentication turned on i get nothing, so it doesnt even get to that
stage. I have also debugged ppp negotition but all i get very little
information from that. LCP comes up.....then comes down again. It almost
seems like the 801 is rejecting the calls, but i cannot see why.
This is part the config from the 3620:
interface BRI1/0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
isdn send-alerting
ppp authentication chap callin
interface Dialer1
ip address xxx.xxx.xxx.xxx 255.255.255.252
encapsulation ppp
dialer remote-name cisco801
dialer pool 1
dialer string xxxxxxxxxxxxxx
dialer-group 1
ppp authentication chap callin
>From the 801:
interface BRI0
no ip address
no ip directed-broadcast
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication chap callin
!
interface Dialer0
ip address xxx.xxx.xxx.xxx 255.255.255.252
no ip directed-broadcast
encapsulation ppp
dialer remote-name cisco3620
dialer string xxxxxxxxxxx
dialer pool 1
dialer-group 1
ppp authentication chap callin
Thanks for any help,
Neil
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
