Check your console line first. If you are not using the line and connector which cisco
provided, you may need to check it pin out. I had the same problem before caused by my
standard serial line (7 wire used, cisco required 8).
md wrote:
> Hello all,
> has anyone ever encountered this problem?
> Whenever I connect to the console port of my catalyst 1900 switch, a
> dial string is displayed that says ATQ0Z or ATQ0Z0. Apparently, the
> previous owner had a modem attached to the port. Any suggestions would
> be greatly appreciated.
>
> thanks
>
> [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
