Hi
I am using AS5300 with 4 PRIs for incoming dialup connection. My normal
dialup connections through PSTN lines are working fine. But when we dial
using ISDN bri channel, the connection gets established but it do not
passes the traffic. The PC gets the IP assigned but could not ping even
to the RAS. When we dial to other brand servers from the same PC and
ISDN line, it works normally.
Here is configuration of Serial interface for reference.
interface Serial0:15
ip unnumbered FastEthernet0
no ip directed-broadcast
encapsulation ppp
dialer idle-timeout 3600
isdn switch-type primary-net5
isdn incoming-voice modem
peer default ip address pool ippool
fair-queue 64 256 0
no cdp enable
ppp authentication pap
!
Please point out what is missing.
Thanks
Aftab
_________________________________
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
