This would work, but you're right... it's usually the out of band management
connection.
Phil
----- Original Message -----
From: "Jim Healis" <[EMAIL PROTECTED]>
Newsgroups: groupstudy.cisco
To: <[EMAIL PROTECTED]>
Sent: Thursday, January 25, 2001 9:18 PM
Subject: 7206 VXR config
> Has anyone ever used the RJ-45 port on the I/O controller on a 7206 to
> actually pass traffic?
> I'm worried that because it sits on a card that has other functions that
> I won't get the needed performance from that port. Or that I won't be
> able to use that port for for passing in-band traffic at all.
>
> So my decision is wavering between getting a 2-port FE LAN adapter or a
> 1-port FE LAN adapter and using the RJ-45 port on the I/O controller.
>
> Any ideas?
>
> Jim
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
