But 100% needed but it is recommended. If you want the slave to come up after a
primary fails and then run the same setup it seems sensible to have the same
amount in both.
Rich
On Jan 30, 12:46pm, mak wrote:
> Subject: 7507 RSP RAM
> Hi,
>
> Is it a must the primary and secondary RSP should have the same RAM
> capacity? Is it ok if I install more RAM on primary RSP temporarily?
>
> Thanks
>
>
> Regards,
> Raymond
>
> _________________________________
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>-- End of excerpt from mak
--
*** Please copy your emails to [EMAIL PROTECTED] ***
#-----------------------------------------------------------------------#
# .. .. | Richard Gallagher | Office:+32 2 704 5000 #
# || || | Euro-CATS | Direct:+32 2 704 5421 #
# || || | Cisco Systems Belgium | Fax: +32 2 704 6000 #
# |||| |||| | Pegasus Park | email: [EMAIL PROTECTED] #
#.:||||||:.:||||||:.| De Kleetlaan, 6A | #
# Cisco Systems | BE 1831 Diegem | http://www.cisco.com/tac #
#-----------------------------------------------------------------------#
"Normal people believe that if it ain't broke, don't fix it. Engineers
believe that if it ain't broke, it doesn't have enough features yet."
Check out this link: http://www.cisco.com/warp/customer/63/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
