What's a terminal server and where can I find more info on the subject?
Adam Burgess wrote:
> > I have four 25xx routers... but I don't have a terminal server.... =
> <snip>
>
> Using your example, you will need to connect the AUX port on R1 to the =
> CON port on R2, etc, etc. =20
>
> Standard Cisco Roll-Over cable is needed.
>
> Config on the R1 should work with:
> line aux 0
> access-class 1 in
> no exec
> exec-timeout 0 0
> transport input all
> stopbits 1
> flowcontrol hardware
>
> You will probably also need to:
> clear line aux 0
> on the control router (or do a restart) before the config will work.
>
> You will then be able to telnet to R1 on TCP 2001 to gain console access =
> to R2.
>
> I do this on a 2509 so my AUX port is actually TCP 2009 as 2001-2008 are =
> used by Async Ports. Likewise on a 2511, AUX would be TCP 2017 as =
> 2001-2016 are used by Async Ports.
>
> Good Luck.
>
> Adam Burgess
> Brisbane, Australia
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
