Did you try Config Maker:
(In config maker, under router, you see the 805)
==================================
http://sj-webadv.cisco.com/cgi-bin/webisapi.dll?Session=367049,U=21553,ST=70,N=5,K=5963,P=Z,Case=483
==================================
--- Piatnitchi Cristian
<[EMAIL PROTECTED]> wrote:
> Hi all
>
> I am trying to set up a DDR config but I am not sure
> I am on the right way.
> Could you send me a sample config lines for that
> (serial interface and line
> 1) ?
>
> My config for that:
>
> line 1
> modem InOut
> transport input all
> stopbits 1
> flowcontrol hardware
>
> I tried a reverse telenet: 10.10.10.1 2001 (line 1)
> I have connection but neither local echo nor answer
> from the moedm for
> AT commands.
> Any explanation for that ?
>
> Thanks in advance
> Cristian
>
> _________________________________
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
=====
= = = = = = = = = = = = = = = = = =
Please send replys to:
[EMAIL PROTECTED]
= = = = = = = = = = = = = = = = = =
__________________________________________________
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
