Hi,
IP accounting only works outgoing on an interface.
You can pick it up using SNMP. I would assume therefore that once the MIB path is
known a simple SNMP "get" statement could pick up the details. You could then put
them into a spreadsheet or similar and this will allow you to manipulate the data.
Teunis,
Hobart. Tasmania
Australia
On Monday, January 29, 2001 at 07:01:47 PM, Bulent Sahin wrote:
> When you configure IP accounting on an interface, you can get information
> about how many bytes of data is coming from a mail server or a file server.
> With a small program you can get this information periodically from the
> router and then you can process this data according to your needs. Allright
> this is what we have. I'm looking for a better software which has some
> additional features and a good GUI .(not Cisco Secure ACS )
> Even this better software has to get data from the router and the router
> has to generate this data. This means "slow down"; No difference.
>
> Bulent Sahin
>
> ----- �zg�n �leti -----
> Kimden: "Nick Payton" <[EMAIL PROTECTED]>
> Kime: "Kevin Wigle" <[EMAIL PROTECTED]>; "'Cisco@Groupstudy. Com'"
> <[EMAIL PROTECTED]>
> G�nderme tarihi: 29 Ocak 2001 Pazartesi 07:52
> Konu: RE: IP accounting
>
>
> > I agree with that statement in that sense of accounting. I was under the
> > impression he was looking for traffic accounting either out of curiousity,
> > troubleshooting, or for SLA issues. Good point though - so Elmer what
> type
> > of "accounting" are you reffering to ?
> >
> > Nick Payton
> >
> > -----Original Message-----
> > From: Kevin Wigle [mailto:[EMAIL PROTECTED]]
> > Sent: Sunday, January 28, 2001 9:01 PM
> > To: Nick Payton; suaveguru; 'Cisco@Groupstudy. Com'
> > Subject: Re: IP accounting
> >
> >
> > A poster pointed the list to NTTacPlus just a few weeks ago.
> >
> > It all depends on what is meant by "ip accounting". Tacacs+ and Radius
> are
> > used within the aaa implementation. Authentication Authorization
> Accounting
> >
> > I am experimenting with the above program now and I can:
> >
> > see when you logged in/off
> > see if you tried to start an exec
> > see what commands you gave while in exec
> > if dialin - how many bytes were transferred
> >
> > and I'm just getting started........ there is lots more......
> >
> > Unfortunately as far as I can tell - the data is raw. i.e. you'll have to
> > suck it into a spreadsheet and massage it as you will.
> >
> > However, it can also log to an obdc/sql database - then you could do
> > queries.
> >
> > I think the Cisco tacacs server has canned reports but I have not looked
> at
> > it yet.
> >
> > Kevin Wigle
> >
> >
> >
> > ----- Original Message -----
> > From: "Nick Payton" <[EMAIL PROTECTED]>
> > To: "suaveguru" <[EMAIL PROTECTED]>; "'Cisco@Groupstudy. Com'"
> > <[EMAIL PROTECTED]>
> > Sent: Monday, 29 January, 2001 00:15
> > Subject: RE: IP accounting
> >
> >
> > > TACACS or Radius ? I am under the belief that those are both
> > authentication
> > > tools, not accounting tools. Try using Netflow if your interested in
> > > accounting - IP accounting would be difficult to use for accounting
> > > purposes, but is usefull for getting a quick synopsis of the traffic
> > coming
> > > across a particular interface.
> > >
> > > Nick
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> > > suaveguru
> > > Sent: Sunday, January 28, 2001 6:49 PM
> > > To: Bulent Sahin; ; Tony van Ree
> > > Subject: Re: IP accounting
> > >
> > >
> > > try tacacas or radius servers they are both reputable
> > > products in the market
> > > --- Bulent Sahin <[EMAIL PROTECTED]> wrote:
> > > > Hi,
> > > > Where can I find such tools?
> > > > Thanks.
> > > >
> > > > Bulent Sahin
> > > >
> > > > ----- �zg�n �leti -----
> > > > Kimden: "Tony van Ree" <[EMAIL PROTECTED]>
> > > > Kime: "Deloso. Elmer G (WPNSTA Yorktown)"
> > > > <[EMAIL PROTECTED]>;
> > > > <[EMAIL PROTECTED]>
> > > > G�nderme tarihi: 24 Ocak 2001 �ar�amba 00:22
> > > > Konu: Re: IP accounting
> > > >
> > > >
> > > > > Hi,
> > > > >
> > > > > IP accounting will slow down your router. I would
> > > > tend to use it as a
> > > > tool for trouble shooting or finding specific stuff
> > > > on your network but not
> > > > much chop for anything else. For billing etc there
> > > > are better tools
> > > > available.
> > > > >
> > > > > I feel routers should route (and switch too) and
> > > > accounting packages
> > > > should get the data from the router and account.
> > > > >
> > > > > Just my feelings.
> > > > >
> > > > > Teunis,
> > > > > Hobart, Tasmania
> > > > > Australia
> > > > >
> > > > >
> > > > > On Tuesday, January 23, 2001 at 08:45:39 AM,
> > > > Deloso. Elmer G (WPNSTA
> > > > Yorktown) wrote:
> > > > >
> > > > > > Hello, group.
> > > > > > Can someone give me feedback on implementing IP
> > > > Accounting on the
> > > > gateway
> > > > > > router? I'd like to know it's plus / minus
> > > > sides, cpu/memory load
> > > > issues,
> > > > > > etc. CCO doesn't seem to have much info on it.
> > > > Thanks in advance.
> > > > > >
> > > > > > Elmer Deloso
> > > > > >
> > > > > > _________________________________
> > > > > > FAQ, list archives, and subscription info:
> > > > http://www.groupstudy.com/list/cisco.html
> > > > > > Report misconduct and Nondisclosure violations
> > > > to [EMAIL PROTECTED]
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > www.tasmail.com
> > > > >
> > > > >
> > > > > _________________________________
> > > > > FAQ, list archives, and subscription info:
> > > > http://www.groupstudy.com/list/cisco.html
> > > > > Report misconduct and Nondisclosure violations to
> > > > [EMAIL PROTECTED]
> > > >
> > > > _________________________________
> > > > FAQ, list archives, and subscription info:
> > > > http://www.groupstudy.com/list/cisco.html
> > > > Report misconduct and Nondisclosure violations to
> > > [EMAIL PROTECTED]
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Auctions - Buy the things you want at great prices.
> > > http://auctions.yahoo.com/
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> > > _________________________________
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > >
> >
> >
> > _________________________________
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
> _________________________________
> FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
>
--
www.tasmail.com
_________________________________
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
